Our Mold Base easily adjusts to job-specific lengths. Simply loosen two screws, slide the front clamp bar to the desired mold plate length, mount the mold plate, tighten the screws-and you're ready for part forming.

"Master-full" features & benefits:

• Rapid mold changeover
• Front/rear sheet clamps pinch off and isolate hot plastic sheet, preventing distortion by holding sheets flat prior to plastic displacement by molds or plugs
• Two 1 1/2" NPT vacuum ports provide maximum air evacuation and guarantee sharp part production
• Simple adjustability to required index length
• Five gallon-per-minute coolant flow rate ensures maximum cooling through two independent water circuits reduces mold temperature recovery time and increases cycle rate.
• Standard overall height 5.5"

Product Specifications:

• Forming Area Maximum: 19" x 23"
• Forming Area Minimum: 19" x 12"
• Inside Depth: 2.75"

The post MB190: Adjustable Master Mold Base 25″ appeared first on Tooling Tech Group.

Our Mold Base easily adjusts to job-specific lengths. Simply loosen two screws, slide the front clamp bar to the desired mold plate length, mount the mold plate, tighten the screws-and you're ready for part forming.

"Master-full" features & benefits:

• Rapid mold changeover
• Front/rear sheet clamps pinch off and isolate hot plastic sheet, preventing distortion by holding sheets flat prior to plastic displacement by molds or plugs
• Two 1 1/2" NPT vacuum ports provide maximum air evacuation and guarantee sharp part production
• Simple adjustability to required index length
• Five gallon-per-minute coolant flow rate ensures maximum cooling through two independent water circuits reduces mold temperature recovery time and increases cycle rate.
• Standard overall height 5.5"

Product Specifications:

• Forming Area Maximum: 25" x 33"
• Forming Area Minimum: 25" x 15"
• Inside Depth: 2.75"

The post MB250: Adjustable Master Mold Base 19″ appeared first on Tooling Tech Group.

Our Mold Base easily adjusts to job-specific lengths. Simply loosen two screws, slide the front clamp bar to the desired mold plate length, mount the mold plate, tighten the screws-and you're ready for part forming.

"Master-full" features & benefits:

• Rapid mold changeover
• Front/rear sheet clamps pinch off and isolate hot plastic sheet, preventing distortion by holding sheets flat prior to plastic displacement by molds or plugs
• Two 1 1/2" NPT vacuum ports provide maximum air evacuation and guarantee sharp part production
• Simple adjustability to required index length
• Five gallon-per-minute coolant flow rate ensures maximum cooling through two independent water circuits reduces mold temperature recovery time and increases cycle rate.
• Standard overall height 5.5"

Product Specifications:

• Forming Area Maximum: 30" x 33"
• Forming Area Minimum: 30" x 15"
• Inside Depth: 2.75"

The post MB300: Adjustable Master Mold Base 30″ appeared first on Tooling Tech Group.

The post PXU3**FR: Universal Pressure Box Front & Rear Panel Sets – Even Size appeared first on Tooling Tech Group.

The post PXU3**FR: Universal Pressure Box Front & Rear Panel Sets – Odd Size appeared first on Tooling Tech Group.

One box does it all!
Handles multiple widths and index lengths! Imagine a versatile, efficient, cost-effective roll-fed thermoform solution that reduces your tooling and operating costs, saves you time and materials, simplifies and speeds changeovers, eliminates the need to stock multiple pressure boxes...and quickly pays for itself!

Perfect for:

• Pressure-forming
• Custom Shops
• Short runs

PXU300 Universal Pressure Box Standard Features & Benefits:

• Quickly and easily adjusts to fit any forming area
• Adjust forming index from 15" to 34"
• Adjustable web width from 15" to 31"
• 4.75" depth inside box
• 6" overall height
• Baffled ventilation prots distribute air evenly
• Accommodations male/female molds
• Runs on either upper or lower platen
• Water-cooled rear panel prevents oven heat migration
• Crafted from 6061 aircraft aluminum
• Threaded stainless steel Helicoil inserts ensure free-running fastener holes
• "H-style" silicone cord assures airtight double seal between sheet and pressure box
• Pressure gauge/relief valve safely and accurately monitors forming air pressure
• Front and rear panels exchange to accommodate various web widths
• Precision-machined channels provide a secure, airtight fit

Optional platen-mounting configurations:

• Platen Clamps
• Threaded Holes
• 438 Quick Change

[gdlr_core_button button-text="Spec Sheet" button-link="https://toolingtechgroup.com/wp-content/uploads/2019/05/universal-pressure-box.pdf" button-link-target="_blank" margin-right="20px" margin-bottom="10px" ]

The post PXU300SE: Universal Pressure Box Side Panel Sets – Even Size appeared first on Tooling Tech Group.

One box does it all!
Handles multiple widths and index lengths! Imagine a versatile, efficient, cost-effective roll-fed thermoform solution that reduces your tooling and operating costs, saves you time and materials, simplifies and speeds changeovers, eliminates the need to stock multiple pressure boxes...and quickly pays for itself!

Perfect for:

• Pressure-forming
• Custom Shops
• Short runs

PXU300 Universal Pressure Box Standard Features & Benefits:

• Quickly and easily adjusts to fit any forming area
• Adjust forming index from 15" to 34"
• Adjustable web width from 15" to 31"
• 4.75" depth inside box
• 6" overall height
• Baffled ventilation prots distribute air evenly
• Accommodations male/female molds
• Runs on either upper or lower platen
• Water-cooled rear panel prevents oven heat migration
• Crafted from 6061 aircraft aluminum
• Threaded stainless steel Helicoil inserts ensure free-running fastener holes
• "H-style" silicone cord assures airtight double seal between sheet and pressure box
• Pressure gauge/relief valve safely and accurately monitors forming air pressure
• Front and rear panels exchange to accommodate various web widths
• Precision-machined channels provide a secure, airtight fit

Optional platen-mounting configurations:

• Platen Clamps
• Threaded Holes
• 438 Quick Change

[gdlr_core_button button-text="Spec Sheet" button-link="https://toolingtechgroup.com/wp-content/uploads/2019/05/universal-pressure-box.pdf" button-link-target="_blank" margin-right="20px" margin-bottom="10px" ]

The post PXU300SO: Universal Pressure Box Side Panel Sets – Odd Size appeared first on Tooling Tech Group.

Dimensions:

• Max: 31" x 34"
• Min: 15" x 15"

Perfect for:

• Pressure-forming
• Custom Shops
• Short runs

PXU300 Universal Pressure Box Standard Features & Benefits:

• Quickly and easily adjusts to fit any forming area
• Adjust forming index from 15" to 34"
• Adjustable web width from 15" to 31"
• 4.75" depth inside box
• 6" overall height
• Baffled ventilation prots distribute air evenly
• Accommodations male/female molds
• Runs on either upper or lower platen
• Water-cooled rear panel prevents oven heat migration
• Crafted from 6061 aircraft aluminum
• Threaded stainless steel Helicoil inserts ensure free-running fastener holes
• "H-style" silicone cord assures airtight double seal between sheet and pressure box
• Pressure gauge/relief valve safely and accurately monitors forming air pressure
• Front and rear panels exchange to accommodate various web widths
• Precision-machined channels provide a secure, airtight fit

[gdlr_core_button button-text="Spec Sheet" button-link="https://toolingtechgroup.com/wp-content/uploads/2019/05/universal-pressure-box.pdf" button-link-target="_blank" margin-right="20px" margin-bottom="10px" ]

The post PXU300B: Universal Pressure Box Base Plate appeared first on Tooling Tech Group.

Standard features include:

• A pressure gauge and relief valve provide safe and accurate air pressure monitoring
• Threaded stainless steel Helicoil inserts ensure free-running fastener holes
• Two 1" ports provide maximum form air for fast, crisp forming
• Standard overall height 6"
• Water-cooled rear panel prevents oven heat migration
• Grip-tight sheet-clamp grooves on front and rear panels
• "H-style" silicone cord assures airtight double seal between sheet and pressure box
• Optional T-slot machine mounting available

Product Specifications:

• Forming Area Maximum: 19" x 23"
• Forming Area Minimum: 19" x 12"
• Inside Depth: 4.75"

[gdlr_core_button button-text="Spec Sheet" button-link="https://toolingtechgroup.com/wp-content/uploads/2019/05/19-in-adjustable-pressure-box.pdf" button-link-target="_blank" margin-right="20px" margin-bottom="10px" ]

The post PX190: Adjustable Pressure Box 19″ appeared first on Tooling Tech Group.

Standard features include:

• A pressure gauge and relief valve provide safe and accurate air pressure monitoring
• Threaded stainless steel Helicoil inserts ensure free-running fastener holes
• Two 1" ports provide maximum form air for fast, crisp forming
• Standard overall height 6"
• Water-cooled rear panel prevents oven heat migration
• Grip-tight sheet-clamp grooves on front and rear panels
• "H-style" silicone cord assures airtight double seal between sheet and pressure box
• Optional T-slot machine mounting available

Product Specifications:

• Forming Area Maximum: 25" x 33"
• Forming Area Minimum: 25" x 15"
• Inside Depth: 4.75"

[gdlr_core_button button-text="Spec Sheet" button-link="https://toolingtechgroup.com/wp-content/uploads/2019/05/25-in-adjustable-pressure-box.pdf" button-link-target="_blank" margin-right="20px" margin-bottom="10px" ]

The post PX250: Adjustable Pressure Box 25″ appeared first on Tooling Tech Group.