Our Mold Base easily adjusts to job-specific lengths. Simply loosen two screws, slide the front clamp bar to the desired mold plate length, mount the mold plate, tighten the screws-and you're ready for part forming.

"Master-full" features & benefits:

• Rapid mold changeover
• Front/rear sheet clamps pinch off and isolate hot plastic sheet, preventing distortion by holding sheets flat prior to plastic displacement by molds or plugs
• Two 1 1/2" NPT vacuum ports provide maximum air evacuation and guarantee sharp part production
• Simple adjustability to required index length
• Five gallon-per-minute coolant flow rate ensures maximum cooling through two independent water circuits reduces mold temperature recovery time and increases cycle rate.
• Standard overall height 5.5"

Product Specifications:

• Forming Area Maximum: 19" x 23"
• Forming Area Minimum: 19" x 12"
• Inside Depth: 2.75"

The post MB190: Adjustable Master Mold Base 25″ appeared first on Tooling Tech Group.

Our Mold Base easily adjusts to job-specific lengths. Simply loosen two screws, slide the front clamp bar to the desired mold plate length, mount the mold plate, tighten the screws-and you're ready for part forming.

"Master-full" features & benefits:

• Rapid mold changeover
• Front/rear sheet clamps pinch off and isolate hot plastic sheet, preventing distortion by holding sheets flat prior to plastic displacement by molds or plugs
• Two 1 1/2" NPT vacuum ports provide maximum air evacuation and guarantee sharp part production
• Simple adjustability to required index length
• Five gallon-per-minute coolant flow rate ensures maximum cooling through two independent water circuits reduces mold temperature recovery time and increases cycle rate.
• Standard overall height 5.5"

Product Specifications:

• Forming Area Maximum: 25" x 33"
• Forming Area Minimum: 25" x 15"
• Inside Depth: 2.75"

The post MB250: Adjustable Master Mold Base 19″ appeared first on Tooling Tech Group.

Our Mold Base easily adjusts to job-specific lengths. Simply loosen two screws, slide the front clamp bar to the desired mold plate length, mount the mold plate, tighten the screws-and you're ready for part forming.

"Master-full" features & benefits:

• Rapid mold changeover
• Front/rear sheet clamps pinch off and isolate hot plastic sheet, preventing distortion by holding sheets flat prior to plastic displacement by molds or plugs
• Two 1 1/2" NPT vacuum ports provide maximum air evacuation and guarantee sharp part production
• Simple adjustability to required index length
• Five gallon-per-minute coolant flow rate ensures maximum cooling through two independent water circuits reduces mold temperature recovery time and increases cycle rate.
• Standard overall height 5.5"

Product Specifications:

• Forming Area Maximum: 30" x 33"
• Forming Area Minimum: 30" x 15"
• Inside Depth: 2.75"

The post MB300: Adjustable Master Mold Base 30″ appeared first on Tooling Tech Group.